Home
Search results “Ppp secrets routes”
How to Create VPN or  PPP Server with MikroTik
 
02:16
Here is lucky 7 steps for creating VPN or PPP Server with MikroTik Step 1: IP, pool , + Step 2: PPP , Profile , + Step 3: PPP , Interface , PPTP Server , Enable with Profile Step 4: PPP , PPPoE Servers , + Step 5: IP , FireWall , NAT : for Local Step 6: IP , FireWall , NAT : for web Step 7: PPP , Secrets , + : for VPN User creation then Join user from outside. Credit goes to [email protected]
Views: 2130 Suvashish Das
CCNA Routing & Switching: PPP Authentication
 
15:40
The Challenge Handshake Authentication Protocol (CHAP) (defined in RFC 1994 leavingcisco.com) verifies the identity of the peer by means of a three-way handshake. These are the general steps performed in CHAP: After the LCP (Link Control Protocol) phase is complete, and CHAP is negotiated between both devices, the authenticator sends a challenge message to the peer. The peer responds with a value calculated through a one-way hash function (Message Digest 5 (MD5)). The authenticator checks the response against its own calculation of the expected hash value. If the values match, the authentication is successful. Otherwise, the connection is terminated. This authentication method depends on a "secret" known only to the authenticator and the peer. The secret is not sent over the link. Although the authentication is only one-way, you can negotiate CHAP in both directions, with the help of the same secret set for mutual authentication. For more information on the advantages and disadvantages of CHAP, refer to RFC 1994 leavingcisco.com. Prerequisites Requirements Readers of this document should have knowledge of these topics: How to enable PPP on the interface through the encapsulation ppp command. The debug ppp negotiation command output. Refer to Understanding debug ppp negotiation Output for more information. Ability to troubleshoot when the Link Control Protocol (LCP) phase is not in the open state. This is because, the PPP authentication phase does not begin until the LCP phase is complete and is in the open state. If the debug ppp negotiation command does not indicate that LCP is open, you need to troubleshoot this issue before you proceed. Note: This document does not address MS-CHAP (Version 1 or Version 2). For more information on MS-CHAP, refer to the MS-CHAP Support and MSCHAP Version 2 documents. Components Used This document is not restricted to specific software and hardware versions. Conventions For more information on document conventions, see the Cisco Technical Tips Conventions. Configure CHAP The procedure to configure CHAP is fairly straightforward. For example, assume that you have two routers, left and right, connected across a network, as shown in figure 1. Figure 1 – Two Routers Connected Across a Network understanding_ppp_chap7.gif To configure CHAP authentication, complete these steps: On the interface, issue the encapsulation ppp command. Enable the use of CHAP authentication on both routers with the ppp authentication chap command. Configure the usernames and passwords. To do so, issue the username username password password command, where username is the hostname of the peer. Ensure that: Passwords are identical at both ends. The router name and password are exactly the same, because they are case-sensitive. Note: By default, the router uses its hostname to identify itself to the peer. However, this CHAP username can be changed through the ppp chap hostname command. Refer to PPP Authentication Using the ppp chap hostname and ppp authentication chap callin Commands for more information. One-Way and Two-Way Authentication CHAP is defined as a one-way authentication method. However, you use CHAP in both directions to create a two-way authentication. Hence, with two-way CHAP, a separate three-way handshake is initiated by each side. In the Cisco CHAP implementation, by default, the called party must authenticate the calling party (unless authentication is completely turned off). Therefore, a one-way authentication initiated by the called party is the minimum possible authentication. However, the calling party can also verify the identity of the called party, and this results in a two-way authentication. One-way authentication is often required when you connect to non-Cisco devices. For one-way authentication, configure the ppp authentication chap callin command on the calling router. Table 1 shows when to configure the callin option. Table 1 – When to Configure the Callin Option Authentication Type Client (calling) NAS (called) One-way (unidirectional) ppp authentication chap callin ppp authentication chap Two-way (bidirectional) ppp authentication chap ppp authentication chap For more information on how to implement one-way authentication, refer to PPP Authentication Using the ppp chap hostname and ppp authentication chap callin Commands. CHAP Configuration Commands and Options Table 2 lists the CHAP commands and options: Table 2 – CHAP Commands and Options Command Description ppp authentication {chap | ms-chap | ms-chap-v2 | eap |pap} [callin] This command enables local authentication of the remote PPP peer with the specified protocol. ppp chap hostname usern
MikroTik Tutorial 4 - Mikrotik Pppoe server with profiles configuration
 
15:36
Mikrotik Pppoe server with profiles configuration 1. Connect to Mikrotik from Winbox 2. Set DNS setting is 8.8.8.8 3. Go to IP Routes and config Gateway IP is 192.168.11.1 4. Open PPP and Lets Start Configuration 5. Go PPPeE Servers and Add settings 6. Go To IP Pool 7. Go PPP Profiles 2 Profile Limit Add 8. Go Secrets and Add Secrets User and set Profile Limit 9. Add PPPoE Connection In PC & Windows 10. Lets Connect PPPoE Users 11. I Have Alredy Connet from Hotspot ;-) 12. Now Issu Internet Service Lets Sea Go To Profile Add DNS 8.8.8.8 13. Go To Firewall Settin For Acces Internet Go To Firewall NAT 14. Congragulation Now im disconect from Hotspot and test PPPoE Connection
Views: 444 MikroTik
How to Create a Site to Site VPN in Main Mode using Preshared Secret
 
08:02
How to create a site to site VPN between two SonicWALL UTM appliances in Main Mode using Preshared Secret
Views: 26509 DellTechCenter
Mikrotik L2TP For Windows Clients
 
05:53
A quick tutorial on configuring Mikrotik for Windows clients. Includes configuring Windows XP and Windows 7 clients. Article link to my blog is http://gregsowell.com/?p=4389
Views: 113495 Greg Sowell
Dusttale fullversion extra+secret ending [undertale fangame]
 
20:23
[Notice to watching this video] ※May hear noises. please low sound volume. wow... It`s happy ending!! creator:Evan Streblow[https://www.youtube.com/channel/UCwICE1-Uyif19bwpCvHsAMg] Download&play!↓ https://gamejolt.com/games/dusttale/308853 SIL!Amalgamtale server↓ https://discord.gg/xS6a35f Industring Line server↓ https://discord.gg/BwztHYK 朱印豆腐`s Industring room server(Discord)↓ https://discord.gg/eJhPk77 ・Twitter→https://twitter.com/E8bqvcTYdeIfv1e?lang=ja ・Discord→朱印豆腐#8427 ・Sound cloud→https://soundcloud.com/q0pm7iaty5o3 ・Question box(質問箱)→https://peing.net/ja/e8bqvctydeifv1e?event=0 Google+ https://plus.google.com/u/0/b/100958304547828774451/100958304547828774451
PPTP VPN FULL TUTORIAL - VPN IN YOUR MOBILE PHONE
 
07:01
Yow whats up guys you dont need to download vpn in app store or in play store just use your vpn in your mobile. PPTP means: Point Tunneling Protocol *The Point-to-Point Tunneling Protocol (PPTP) is an obsolete method for implementing virtual private networks, with many known security issues. PPTP uses a TCP control channel and a Generic Routing Encapsulation tunnel to encapsulate PPP packets.* Please help me to achieve my goal (1000 SUBSCRIBER) - Subscribe to my channel https://goo.gl/ndB6Vx Also thanks for the constant love and support i am getting from you guys. Peace out!! If you have any questions, propositions or just wanna to send me your moments in PUBG, FORTNITE, RADICAL HEIGHTS PM me on- [email protected] / https://www.facebook.com/YashLagayanVlogs at your service. Everything is licensed under Creative Commons: By Attribution 3.0 https://creativecommons.org/licenses/... Thank you for watching to my video, i hope you like it. please keep on support my channel and Subscribe my channel for more video's to come. Thank you guys. __ __ For Any question and Problem please sent me an email here: 👇 Gmail: [email protected] _ Check out my Social Media: 👇 Connect me at Facebook: https://www.facebook.com/YashLagayanVlogs/ 👇 Connect me at Instagram: https://www.instagram.com/yashlgyn 👇 Connect me at Twitter:https://mobile.twitter.com/yash_lagayan 👇 Connect me at Twitch: https://m.twitch.tv/yashy96/profile __ Credit To My background Music. LIKE & SUBSCRIBE
Views: 325 Yash Lagayan Vlogs
Cisco Routing: Configuring PPP Encapsulation & Authentication
 
07:23
Learn How to configure Cisco PPP encapsulation with
Views: 72 Rashmi Dubey
How to export configuration mikrotik to text file
 
01:08
This video could assist you the way, how to export configure on Mikrotik to text file.
Views: 25288 Heng Bun
setting up MikroTik as L2TP VPN server with IPSec and AES up to 256 bit encryption
 
09:25
This video shows how to configure MikroTik router as L2TP VPN server for clients as well as encryption enabled by IPSec and AES up to 256-bit. Download Firewall rules for allowing L2TP Connection: http://adf.ly/1eKm74
Views: 72283 Taha N. Alrawi
CCNA Routing & Switching : Enable Password - saving configurations
 
09:15
This command works on both routers and switches Router(config)#enable password test Sets enable password to test Router(config)#enable secret vinita Sets enable secret password to vinita Router(config)#line console 0 Enters console line mode Router(config-line)#password console Sets console line mode password to console Router(config-line)#login Enables password checking at login Router(config)#line vty 0 4 Enters vty line mode for all five vty lines Router(config-line)#password telnet Sets vty password to telnet Router(config-line)#login Enables password checking at login Router(config)#line aux 0 Enters auxiliary line mode Router(config-line)#password aux Sets auxiliary line mode password to aux Router(config-line)#login Enables password checking at login CAUTION: The enable secret password is encrypted by default. The enable password is not. For this reason, recommended practice is that you never use the enable password command. Use only the enable secret password command in a router or switch configuration. You cannot set both enable secret password and enable password to the same password. Doing so defeats the use of encryption. Configuring a Fast Ethernet Interface Router(config)#interface fastethernet 0/0 Moves to Fast Ethernet 0/0 interface configuration mode Router(config-if)#description Student Lab LAN Optional descriptor of the link is locally significant Router(config-if)#ip address 192.168.20.1 255.255.255.0 Assigns address and subnet mask to interface Router(config-if)#no shutdown Turns interface on Creating a Message of the Day Banner Router(config)#banner motd # Next Schedule metting with manager is Postponed # Router(config)# The MOTD banner is displayed on all terminals and is useful for sending messages that affect all users. Use the no banner motd command to disable the MOTD banner. The MOTD banner displays before the login prompt and the login banner, if one has been created. Creating a Login Banner Router(config)#banner login # Unauthorized access is prohibited ! Please enter your username and password. # Router(config)#
History of Pakistan #32 | The Making of PTI & Benazir's Secret Mission | In Urdu
 
14:11
The 32nd episode of the #HistoryOfPakistan series of #DekhoSunoJano is about a historical turning point when Imran Khan chose politics in the wake of hurdles in his social work. It is also the story of Benazir’s historical foreign visit that contributed to Pakistan’s technological advancement. To know more about Pakistan’s history subscribe to our channel. Follow Us: https://www.youtube.com/channel/UChOzmkBxTHbZNZdiiYolWoA Facebook: https://www.facebook.com/JanoDotPk Twitter: https://twitter.com/JanoDotPk Instagram: https://www.instragram.com/JanoDotPk Dailymotion: https://www.dailymotion.com/JanoDotPk Watch All Episodes of Pakistan's History: https://goo.gl/zmaAto Watch All Episodes of Nation Power Series: https://goo.gl/mCmKDm Must share your thoughts in comments below.
Views: 253817 Dekho Suno Jano
L2TP over IPsec VPN Server
 
14:27
This video demonstrates a couple of ways to set up an L2TP over IPsec VPN Server on an Edge Router. Here are the steps discussed in this video: STEP 1: Setting WAN Interface and internal network set vpn ipsec ipsec-interfaces interface eth0 set vpn ipsec nat-networks allowed-network 192.168.1.1/24 set vpn ipsec nat-traversal enable STEP 2: Setting Authentication Mode and Create Users set vpn l2tp remote-access authentication mode local set vpn l2tp remote-access authentication local-users username xxxx password xxxx STEP 3: Setting Client IP Pool set vpn l2tp remote-access client-ip-pool start 192.168.1.xxx set vpn l2tp remote-access client-ip-pool stop 192.168.1.xxx STEP 4: Setting Client DNS Servers set vpn l2tp remote-access dns-servers server-1 8.8.8.8 set vpn l2tp remote-access dns-servers server-2 4.2.2.2 STEP 5: Setting Pre-shared Secret set vpn l2tp remote-access ipsec-settings authentication mode pre-shared-secret set vpn l2tp remote-access ipsec-settings authentication pre-shared-secret xxxxxxx set vpn l2tp remote-access ipsec-settings ike-lifetime 3600 STEP 6: Setting Outside Access For Static: set vpn l2tp remote-access outside-address xxx.xxx.xxx.xx For DHCP: set vpn l2tp remote-access dhcp-interface eth0 For Dynamic DNS w/PPPOE: set vpn l2tp remote-access outside-address 0.0.0.0 STEP 7: Save Settings commit; save; exit To learn more about EdgeRouters and Ubiquiti products - http://www.ubnt.com Please share this video - https://youtu.be/nSYmcaOMM7Y Amazon Affiliate Links: EdgeRouter X - http://amzn.to/2kTFTUI EdgeRouter X SFP - http://amzn.to/2C6cDpe EdgeRouter Lite - http://amzn.to/2zImOKo Ubiquiti Cloud Key - http://amzn.to/2CRIXIo Unifi 8-Port 60W Switch - http://amzn.to/2CTmLO5 UAP-AP-Lite - http://amzn.to/2C4OAXP Disclaimers: I participate in the Amazon Affiliate Program. When purchasing using my Amazon Affiliate links, your price doesn't change. You pay the same, but I do get a small percentage of the sale in commission. This helps the channel to continue creating content. All images used in this video are my own. The music Yeah Yeah is from the YouTube's free music library. Yeah Yeah by Audionautix is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/...) Artist: http://audionautix.com/. About Tony: I am a retired educator of 32 years. I started out as an instrumental music teacher and evolved into technology support. After many years of providing technology support to teachers and students, the last ten years of my career, I was in a leadership position of Technology Coordinator and also Supervisor of Technology. My passion has always been helping people. I hope to continue helping people in my youtube community. That being said, I have no association with Ubiquiti Networks, the makers of the Edge Router, nor am I being paid to make this video. I purchased my own Edge Router for use on my own home network. Contact Tony at: [email protected] Follow me on: Twitter @quiktechreview Facebook @quiktechsolutionsllc Hope you enjoyed this video. Regards!!
Script On Up & On Down On PPP Profiles MikroTik By Amnuay Pintong
 
14:56
Script On Up & On Down On PPP Profiles MikroTik By Amnuay Pintong download file script : https://drive.google.com/file/d/0B-4xV6rVeUayUUFpM1V5SVRZT28/view?usp=sharing
Create personal  VPN server in linux server and connect from windows pc
 
08:15
In this tutorial you will learn how to create a personal vpn server with linux based ec2 Instance and connect from windows pc Requirements:- 1. Your Instance must be in started mode. 2. Connected through SSH to the instance. 3. Need to install Point-to-Point Tunneling Protocol 4. Find the private ip of your ec2 instance 5. Then need to configure the files pptpd.conf,pptpd-options, sysctl.conf, rc.local, chap-secrets Steps-- 1. Connect ssh to ec2 instance. 2. Install pptp by typing the following command sudo apt-get install pptpd 3. Modify the file pptpd.conf using the following command sudo nano /etc/pptpd.conf 4. Uncomment the following two lines and change the local ip address to your Instance's private ip from aws console. #localip 192.168.0.1 #remoteip 192.168.0.234-238,192.168.0.245 5. Then save and exit the file. 6. Modify the file pptpd-options using the following command sudo nano /etc/ppp/pptpd-options 7. Uncomment the two lines under Networking and Routing section, add open dns server ip 208.67.222.222 and 208.67.220.220 or you can use google dns 8.8.8.8 and 8.8.4.4 #ms-dns 10.0.0.1 #ms-dns 10.0.0.2 8. Then save and exit the file. 9. Modify the file sysctl.conf using the following command sudo nano /etc/sysctl.conf 10. Uncomment the line #net.ipv4.ip_forward=1 11. Then save and exit the file. 12. Now execute the command sudo iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE 13. Modify the file rc.local using the following command sudo nano /etc/rc.local 14. Add the following line above exit sudo iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE 15. Save and exit the file. 16. Now modify the file chap-secrets using the following command sudo nano /etc/ppp/chap-secrets 17. Write your user name under client, add server name pptpd under server, add password under secret, add * under ip ddresses if you want to use the VPN from any where. If you use here only actual ip address then you only able to connect from that ip address. 18. Now save and exit the file. 19. Now Restart your vpn server using the following command /etc/init.d/pptpd restart 20. Now rboot your running system using the command sudo reboot 21. Open the tcp port 1723 and 47 in your ec2 security group 22. Now click on add vpn from control panel - Internet Option - connection - Add vpn 23. Add your public dns name in Internet address. 24. In destination name you can give your connection name and click on create 25. Now you can find the name myvpn from the list of connection 26. Add user name and password which saved in chap-secrets file. 27. Now check your ip address from the link http://whatismyip.com
Views: 2943 Julfi Tutorials
Mikrotik PPPoE Server And PPPoE Client Setup windows 7 Bangla Tutorial Free (PPPOE  part 2)
 
04:06
Mikrotik Router Step by Step PPPOE Server Setup |PPPOE Server Configuration Mikrotik PPPoE Server And PPPoE Client Setup In this tutorial Bangla I am going to show you pppoe configuration server and client with MikroTik router OS and with oracle vmware windows 7 . #PPPOE user create , #pppoe user password, #bandwidth control for pppoe user , #connect to pc client test . Through watching this video you will learn some advanced level access control, user restriction and control bandwidth total usage as well as bandwidth throttling. You will also learn how to connect pppoe server from a client pc like windows xp .win 7 etc.(Dial Up setup)This video provide how to setup PPPoE server using mikrotik router in step by step.For example we configure step by step Ip address, basic NAT, ip route and pcq for bandwidth management. Tag: mikrotik, pppoe, dial up, mikrotik pppoe, banglamikrotik, mikrotik router, routers, routeros, mikrotik pppoe server, mikrotik firewall nat, mikrotik pppoe server setup, Mikrotik, Mikrotik Bangla, Mikrotik Bangla Tutorial, P PPoE server, PPPoe Server Configuration, PPPoE profile configure, PPPoE Secret Configure, Mikrotik PPPoE Server Configur, mikrotik, mikrotik router, routers, routeros, mikrotik pppoe server, mikrotik firewall nat, mikrotik pppoe server setup winbox, mikrotik, Server, Tips, Tutorial, PPPoE, server, howto, configure, pppoe, dialup, connection, in, VPN, Server (computing), Virtual Private Network Please subscriber our channel for new free video . -------------------------------------------------------------------------------------------------- ## Check out my All free video list : https://goo.gl/pK3kwP ## twitter Link: https://goo.gl/wQ8fpG ## Facebook link : www.fb.com/sumon15 ## dailymotion Link : http://goo.gl/FDvkUC ## my personal site : http://rahmantutor.blogspot.com/ ## https://www.youtube.com/channel/UCQWPofva3gOsPCvjJ95Sb3A ------------------------------------------------------------------------------------------------------------- copy right by Rahman Tutor. more info : www.fb.com/sumon15 number : 01912429315
Views: 2855 Tutor Rahman
Mikrotik Router PPTP VPN Server Configuration | Mikrotik Remote Access VPN Service Setup
 
05:57
Point to point tunneling protocol is a method for implementing virtual private network .PPTP used controll channel over TCP and GRE and encalsulting ppp packet.PPTP have many kind of security variability key establishment. This video provide step by step mikrotik router remote access vpn server configuration. For example we setup a PPTP VPN service. http://mikrotikroutersetup.blogspot.com/2014/02/mikrotik-router-pptp-remote-access-vpn-server.html
Views: 158611 Tania Sultana
MikroTik Site to Site EoIP Tunnel Configuration with IPsec
 
16:07
EoIP encapsulates IP packets in IP to make a tunnel between two MkroTik routers. EoIP tunnel with IPsec ensures IP packet encapsulation as well as authentication and encryption. So, EoIP tunnel with IPsec makes a secure and authenticated site to site VPN that can be reliable to send private data across public network. For more details: http://systemzone.net/mikrotik-site-to-site-eoip-tunnel-with-ipsec
Views: 3118 System Zone
OpenVPN Server - Mikrotik
 
19:29
OpenVPN Server - Mikrotik Configuración Clientes Linux - Mac - Windows #Certificado Servidor /certificate add name=CA-tpl country="AR" state="Buenos Aires" locality="CABA" organization="CNSoluciones" unit="CNSoluciones" common-name="CA" key-size=4096 days-valid=3650 key-usage=crl-sign,key-cert-sign /certificate sign CA-tpl ca-crl-host=127.0.0.1 name="CA" /certificate add name=SERVER-tpl country="AR" state="Buenos Aires" locality="CABA" organization="CNSoluciones" unit="CNSoluciones" common-name="172.15.10.1" key-size=4096 days-valid=1095 key-usage=digital-signature,key-encipherment,tls-server /certificate sign SERVER-tpl ca="CA" name="SERVER" #Certificado Cliente /certificate add name=CLIENT-tpl country="AR" state="Buenos Aires" locality="CABA" organization="CNSoluciones" unit="CNSoluciones" common-name="CLIENT" key-size=4096 days-valid=3650 key-usage=tls-client /certificate add name=CLIENT1 copy-from="CLIENT-tpl" common-name="CLIENT1" /certificate sign CLIENT1 ca="CA" name="CLIENT1" /certificate export-certificate CA export-passphrase="" /certificate export-certificate CLIENT1 export-passphrase="123456789" #CLIENT WINTENDO... :) https://openvpn.net/index.php/open-source/downloads.html #CLIENT MACOS https://www.sparklabs.com/viscosity/ #CLIENT GNU/Linux Ubuntu sudo apt-get install openvpn openvpn --config client1.ovpn #Wallpaper http://www.wallpapersxl.com/wallpaper/2560x1600/avenged-sevenfold-nuevos-de-mikrotik-mke-solutions-469516.html?ex=true #Template client1.ovpn client dev tun proto tcp-client remote my-ip-mkt.com port 1194 nobind persist-key persist-tun tls-client remote-cert-tls server ca ca.crt cert client1.crt key client1.key verb 4 mute 10 cipher AES-256-CBC auth SHA1 auth-user-pass secret auth-nocache ;redirect-gateway def1 route 10.0.0.0 255.255.255.0 route 172.15.10.0 255.255.255.0
Views: 21627 CNSoluciones
Configuring PPP Authentication CHAP
 
07:36
Cisco PPP
Views: 11198 Paul Browning
how to login winbox & create dailup(pppoe)client profile
 
03:15
The PPPoE (Point to Point Protocol over Ethernet) protocol provides extensive user management, network management and accounting benefits to ISPs and network administrators. Currently PPPoE is used mainly by ISPs to control client connections for xDSL and cable modems as well as plain Ethernet networks. PPPoE is an extension of the standard Point to Point Protocol (PPP). The difference between them is expressed in transport method: PPPoE employs Ethernet instead of serial modem connection. Generally speaking, PPPoE is used to hand out IP addresses to clients based on authentication by username (and also if required, by workstation) as opposed to workstation only authentication where static IP addresses or DHCP are used. It is advised not to use static IP addresses or DHCP on the same interfaces as PPPoE for obvious security reasons. The PPPoE client and server wo rk over any Layer2 Ethernet level interface on the router - wireless 802.11 (Aironet, Cisco, WaveLan, Prism, Atheros), 10/100/1000 Mbit/s Ethernet, RadioLan and EoIP (Ethernet over IP tunnel). More information, visit http://wiki.mikrotik.com/wiki/Manual:...
Cisco CCNA Packet Tracer Ultimate labs: PPP & PPP CHAP: Answers Part 4
 
08:40
Packet Tracer file (PT Version 7.1): https://goo.gl/iJg2cJ Get the Packet Tracer course for only $10 by clicking here: https://goo.gl/vikgKN Get my ICND1 and ICND2 courses for $10 here: https://goo.gl/XR1xm9 (you will get ICND2 as a free bonus when you buy the ICND1 course). For lots more content, visit http://www.davidbombal.com - learn about GNS3, CCNA, Packet Tracer, Python, Ansible and much, much more. The Point-to-Point Protocol (PPP) provides a standard method for transporting multi-protocol datagrams over point-to-point links. PPP is comprised of three main components: ● A method for encapsulating multi-protocol datagrams. ● A Link Control Protocol (LCP) for establishing, configuring, and testing the data-link connection. ● A family of Network Control Protocols (NCPs) for establishing and configuring different network-layer protocols. The Challenge Handshake Authentication Protocol (CHAP) (defined in RFC 1994) verifies the identity of the peer by means of a three-way handshake. These are the general steps performed in CHAP: After the LCP (Link Control Protocol) phase is complete, and CHAP is negotiated between both devices, the authenticator sends a challenge message to the peer. The peer responds with a value calculated through a one-way hash function (Message Digest 5 (MD5)). The authenticator checks the response against its own calculation of the expected hash value. If the values match, the authentication is successful. Otherwise, the connection is terminated. This authentication method depends on a "secret" known only to the authenticator and the peer. The secret is not sent over the link. Although the authentication is only one-way, you can negotiate CHAP in both directions, with the help of the same secret set for mutual authentication. For more information on the advantages and disadvantages of CHAP, refer to RFC 1994 Translation: So to complete the bonus tasks, we need to create a DHCP pool on the customer routers to allocate IP addresses to their PCs. In the relevant subnets, we need to configure the customer routers with NAT so that the PCs can access the Internet. And we need to verify that things are working by making sure that PC 1 and PC 2 can ping Cisco.com. So on Customer Router 1 show ip interface brief no IP address is configured on gigabit 0.0.0 so we need to go on to that interface. Configure an IP address of 10.1.1.1/24 mask and no shut the interface. So show ip interface brief now shows us that interface is up, up and it’s configured with this IP address. So let’s configure a DHCP pool So ip dhcp pool I’m going to give it a name of PC. You could call this anything in the exam, follow the instructions in the question, but here we can configure it with any name PC is fine for this example. Network that we’re going to configure is 10.1.1.0 with a /24 mask. Default gateway or default router will be the local router, DNS server will be Google.com. So don’t forget to configure the DNS server in your DHCP pool. Now that’s configured. Let’s verify that the PC gets an IP address. So on the PC’s configuration; I’m going to configure it to use DHCP. Go to desktop, command prompt type, ip config We can see that an IP address has been allocated to the PC. Back on the router, notice we see that there was an address conflict for that IP address. So the IP address that was allocated to the PC is this. Now you could have created a DHCP excluded range and excluded IP addresses in a specific range. That would force the router to allocate IP addresses starting at 11. But in this example, it’s worked without that configuration. The router did a ping and saw that it had this IP address, so it allocated the next IP address in the range. So that looks good. The PC will hopefully be able to ping the router which it can. But it won’t be able to ping Google.com at this point because we need to configure NAT on the router. So on Customer Router 1, interface serial 1/0 This is going to be our NAT outside interface. ......
Views: 502 David Bombal
PPPoE Server Configuration in MikroTik Router
 
11:13
PPPoE server is one of the most popular services in MikroTik router. It is popularly used in ISP Company as well as enterprise office. So, it will be beneficial to a system administrator to know how to configure PPPoE server in MikroTik router. This video will show the necessary steps to configure PPPoE server in MikroTik router. For more details about MikroTik PPPoE Server visit http://systemzone.net/pppoe-server-configuration-in-mikrotik-router
Views: 27857 System Zone
History of Pakistan #34 | The story of Failed Accountability in 1996 | By Faisal Warraich in Urdu
 
14:38
When the President Farooq Laghari sacked Benazir Bhutto's second government, there was an uproar against corruption. The new caretaker government under the PM Malik Meraj Khalid embarked on the ambitious path of accountability. Asif Zardari, Rehman Malik and other many PPP leaders were targeted but Nawaz Sharif and PML-N largely escaped the onslaught. The 34th episode of the #HistoryOfPakistan series from #DekhoSunoJano is the story of a failed accountability experiment in Pakistan in 1996-97. For more thrilling episodes of the #HistoryOfPakistan series subscribe to #DekhoSunoJano. Follow Us: https://www.youtube.com/channel/UChOzmkBxTHbZNZdiiYolWoA Facebook: https://www.facebook.com/JanoDotPk Twitter: https://twitter.com/JanoDotPk Instagram: https://www.instragram.com/JanoDotPk Dailymotion: https://www.dailymotion.com/JanoDotPk Watch All Episodes of Pakistan's History: https://goo.gl/zmaAto Watch All Episodes of Nation Power Series: https://goo.gl/mCmKDm Must share your thoughts in comments below.
Views: 60124 Dekho Suno Jano
Mikrotik Router Connecting a Remote Client via L2TP Tunnel
 
03:44
Mikrotik Router Connecting a Remote Client via L2TP Tunnel http://mikrotikroutersetup.blogspot.com
Views: 1850 Tania Sultana
PMLN Aur PPP Ka Aik Hone Ka Faisala | Headlines 6 PM | 29 July 2018 | 24 News
 
11:01
PMLN Aur PPP Ka Aik Hone Ka Faisala | Headlines 6 PM | 29 July 2018 | 24 News All latest happenings on pakistani Elections 2018, Panama Case, Dawn Leaks, Maryam Nawaz, Imran Khan, Nawaz Sharif, Qamar Javed Bajwaa, DG ISPR General Asif Ghafoor and best analysis of Best Anchors. Subscribe to find out the latest news and updates, the best talk shows and lifestyle programs and constant a live news feed. www.youtube.com/TalkShowsNow
Views: 3153 Talk Shows Now
How to configure the SonicWALL WAN / X1 Interface with PPPoE Connection
 
03:07
Learn about how to configure the SonicWALL WAN / X1 Interface with PPPoE Connection, “SonicWall video solutions” https://fuzeqna.com/sonicwallkb/ext/kbdetail.aspx?kbid=7456
Views: 5657 DellTechCenter
Lil Uzi Vert - New Patek [Official Audio]
 
05:44
Lil Uzi Vert - New Patek Stream/Download - https://Uzi.lnk.to/NewPatek Connect with Lil Uzi Vert: https://twitter.com/LILUZIVERT https://www.instagram.com/liluzivert/ https://www.facebook.com/LilUziVert/ https://www.youtube.com/user/LILUZIVERT http://liluziofficial.com/
Views: 41904229 LIL UZI VERT
How-To: Easy PPTP VPN Server on Linux (Ubuntu/Debian)
 
16:34
In this video, I demonstrate how to setup a PPTP VPN server relatively easily on a Linux machine. As follows is the notes file found in the video: 1. Update and install pptpd 2. Network config - static IP, bridged vs NAT VPN Network gateway address: 192.168.0.1 VPN server address: 192.168.0.220 client addresses: 192.168.0.221-225 3. Edit /etc/ppp/pptpd-options #refuse-pap #refuse-chap #refuse-mschap ms-dns 8.8.8.8 (DNS Server for VPN) 4. Edit /etc/pptpd.conf localip 192.168.0.x remoteip 192.168.0.y1-y2 5. Edit /etc/ppp/chap-secrets Enter username, pptp server name, password, client IP 6. Edit /etc/sysctl.conf Uncomment IPV4 Forward line (net.ipv4.ip_forward=1) 7. Install/configure ufw sudo ufw allow 47 sudo ufw allow 1723 sudo ufw enable (IP forwarding for NAT VPN setups) /etc/default/ufw DEFAULT_FORWARD_POLICY to ACCEPT /etc/ufw/before.rules *nat :POSTROUTING ACCEPT [0:0] -A POSTROUTING -s 192.168.0.0/24 -o eth0 -j MASQUERADE COMMIT -A ufw-before-input -p 47 -j ACCEPT 8. Port forward (ports 47 and 1723) to IP of VPN server
Views: 17423 Someone7089
Why People Still Fall for the Nigerian Email Scam
 
14:39
Brian stumbled onto the perfect get-rich-quick scheme! Then some men in suits showed up, and this informative episode is serving as Brian's community service. Hmm, maybe Jason was onto something... Extended Outtakes for this episode: https://youtu.be/eZrNLj4Hk7k ----------------------------------------------------------------- Additional Information The original Something Awful forum thread for the P-P-P-Powerbook: https://forums.somethingawful.com/showthread.php?threadid=1016390&userid=0&perpage=40&pagenumber=1 Article from The Guardian on Janella Spears, the 419 victim: https://theguardian.com/technology/2008/nov/15/internet-usa Every Day Is an Atheist Holiday by Penn Jillette: https://books.google.com/books?id=ADt_cfF0ubYC 419 Fraud Statistics, 2013: http://ultrascan-agi.com/public_html/html/pdf_files/Pre-Release- 419_Advance_Fee_Fraud_Statistics_2013-July-10-2014-NOT-FINAL-1.pdf The Secretly Smart Reason Scam Emails Are Poorly Written http://mentalfloss.com/article/82814/secretly-smart-reason-scam-emails-are-poorly-written ----------------------------------------------------------------- Patreon: https://patreon.com/modernrogue Discord (patron reward): https://discord.gg/modernrogue MR Articles: https://themodernrogue.com Outtakes & BTS: https://youtube.com/scamstuff Subreddit: https://modernrogue.reddit.com Merch: https://shop.themodernrogue.com Twitter: https://twitter.com/modernrogueshow Instagram: https://instagram.com/modernrogueshow Facebook: https://facebook.com/modernrogues ----------------------------------------------------------------- Music used in this episode: "Attila" by Mono:Massive https://chillhop.bandcamp.com/album/chillhop-essentials-spring-2017 "Crossing Paths" by Brock Berrigan https://chillhop.bandcamp.com/album/chillhop-essentials-spring-2017 "stryman" by baaskaT https://chillhop.bandcamp.com/album/chillhop-essentials-spring-2017 "Trinidad" by Ian Ewing https://chillhop.bandcamp.com/album/chillhop-essentials-spring-2017 ----------------------------------------------------------------- This episode was made with the help of: Brian Brushwood - host -- https://twitter.com/shwood Jason Murphy - host / research -- https://instagram.com/captainmurphy Brandt Hughes - camera operator / editor -- https://twitter.com/gatowag Bryce Castillo - camera operator / live audio engineer -- https://twitter.com/brycas
Views: 1608879 The Modern Rogue
Step by step guide on how to setup remote routing logs  VPN connection
 
48:10
In this video, you will learn how to enable tracing capability in order to track all remote dialed vpn access and review in more detail what happen to your system. The Windows 2000 Routing and Remote Access service has an extensive tracing capability that you can use to troubleshoot complex network problems. You can enable the components in Windows 2000 Server to log tracing information to files using the Netsh command or through the registry. PPP logging records the series of programming functions and PPP control messages during a PPP connection and is a valuable source of information when you are troubleshooting the failure of a PPP connection. To enable PPP logging, select the Enable Point-to-Point Protocol (PPP) logging option on the PPP tab on the properties of a remote access server.
Views: 39 Fun and Adventures
[PPP] Forgetting Something? (Sonic the Hedgehog 2)
 
00:59
Bad pet! BAD! Like us on Facebook! http://www.facebook.com/paradoxpowerplays
Views: 22457 ParadoxPowerPlays
Cisco CCNA Packet Tracer Ultimate labs: PPP & PPP CHAP: Answers Part 5
 
05:51
Packet Tracer file (PT Version 7.1): https://goo.gl/iJg2cJ Get the Packet Tracer course for only $10 by clicking here: https://goo.gl/vikgKN Get my ICND1 and ICND2 courses for $10 here: https://goo.gl/XR1xm9 (you will get ICND2 as a free bonus when you buy the ICND1 course). For lots more content, visit http://www.davidbombal.com - learn about GNS3, CCNA, Packet Tracer, Python, Ansible and much, much more. The Point-to-Point Protocol (PPP) provides a standard method for transporting multi-protocol datagrams over point-to-point links. PPP is comprised of three main components: ● A method for encapsulating multi-protocol datagrams. ● A Link Control Protocol (LCP) for establishing, configuring, and testing the data-link connection. ● A family of Network Control Protocols (NCPs) for establishing and configuring different network-layer protocols. The Challenge Handshake Authentication Protocol (CHAP) (defined in RFC 1994) verifies the identity of the peer by means of a three-way handshake. These are the general steps performed in CHAP: After the LCP (Link Control Protocol) phase is complete, and CHAP is negotiated between both devices, the authenticator sends a challenge message to the peer. The peer responds with a value calculated through a one-way hash function (Message Digest 5 (MD5)). The authenticator checks the response against its own calculation of the expected hash value. If the values match, the authentication is successful. Otherwise, the connection is terminated. This authentication method depends on a "secret" known only to the authenticator and the peer. The secret is not sent over the link. Although the authentication is only one-way, you can negotiate CHAP in both directions, with the help of the same secret set for mutual authentication. For more information on the advantages and disadvantages of CHAP, refer to RFC 1994
Views: 365 David Bombal
Pakistani Reacts On | Top 10 Economies in the world 2018 GDP PPP India Rank  3 !!! | PNMM
 
05:29
This is a Pakistani channel where u will find all the entertaining stuff like news,music and masti,Reactions Mostly U See How we React On India Cities and other countries stuff. We will also try to give good positive reactions to some trending and funny videos. Make sure to comment on our videos give us suggestions about the videos in which you want us to give reaction to. Make sure to smash that subscribe button and press the bell icon so u never miss an update from Pakistani News Music and Masti. Subscribe subscribe and subscribe❤💯 What Is GDP Explain:- The gross domestic product (GDP) is one of the primary indicators used to gauge the health of a country's economy. It represents the total dollar value of all goods and services produced over a specific time period, often referred to as the size of the economy. Usually, GDP is expressed as a comparison to the previous quarter or year. For example, if the Q3 2017 GDP of a country is up 3%, the economy of that country has grown by 3% over the third quarter. While quarterly growth rates are a periodic measure of how the economy is faring, annual GDP figures are often considered the benchmark for the size of the economy. In the United States, real GDP increased at an annual rate of 2.6 percent in the fourth quarter of 2017, according to figures released by the Bureau of Economic Analysis. For all of 2017, GDP grew 2.3 percent. Current-dollar GDP increased 4.1 percent, or $762.3 billion, in 2017 to a level of $19,386.8 billion. The countries with the largest GDP in descending order are 1. The United States, 2. China, 3. Japan, 4. Germany, 5. The United Kingdom, 6. France, 7. India, 8. Italy, 9. Brazil and 10. Canada. Measuring GDP can be complicated, but at its most basic, the calculation can be done in one of two ways: either by adding up what everyone earned in a year (income approach) or by adding up what everyone spent (expenditure method). Logically, both measures should arrive at roughly the same total. The income approach, which is sometimes referred to as GDP(I), is calculated by adding up total compensation to employees, gross profits for incorporated and nonincorporated firms, and taxes less any subsidies. The expenditure method is the more common approach and is calculated by adding total consumption, investment, government spending and net exports. As one can imagine, economic production and growth – which GDP represents – have a large impact on nearly everyone within that economy. For example, when the economy is healthy, you will typically see low unemployment and wage increases as businesses demand labor to meet the growing economy. A significant change in GDP, whether up or down, usually has a significant effect on the stock market. It's not hard to understand why; a bad economy usually means lower earnings for companies, which translates into lower stock prices. Investors often pay attention to both positive and negative GDP growth when assessing an investment idea or coming up with an investment strategy. There are actually two types of GDPs that economists use to measure a country's economy. Nominal GDP refers to a country's economic output without an inflation adjustment, while Real GDP is equal to the economic output adjusted for the effects of inflation. Economists will look at negative GDP growth to determine whether an economy is in a recession.
Views: 4279 Reaction Time & PNMM
Potter Puppet Pals: The Mysterious Ticking Noise
 
02:07
https://www.patreon.com/NeilC
Views: 183691496 Neil Cicierega
SOCU QUESTIONS MORE FORMER PPP MINISTERS
 
04:20
We take you now to day two of questioning as SOCU tightens the noose in the Pradoville 2 investigation. Here is more.
CapitalTV; Senate Chairmanship: PMLN appears stronger than PPP & PTI Cross Check 09 March 2018
 
34:45
Senate Chairmanship: PMLN appears stronger than PPP & PTI as senior analysit Imtiaz Alam cliams that PPP & PTI's differences will give an edge to PMLN to win senate chairmanship Cross Check With OT 09 March 2018
Views: 3069 Capital TV Live
Red Velvet 레드벨벳 '러시안 룰렛 (Russian Roulette)' MV
 
03:32
Red Velvet’s 3rd mini album “Russian Roulette” has been released. Listen and download on iTunes & Apple Music, Spotify, and Google Play Music http://smarturl.it/RV_RussianRoulette Red Velvet Official http://redvelvet.smtown.com http://www.youtube.com/redvelvet http://www.facebook.com/RedVelvet http://www.instagram.com/redvelvet.smtown http://twitter.com/RVsmtown Red Velvet 레드벨벳 '러시안 룰렛 (Russian Roulette)' MV ℗ S.M.Entertainment
Views: 131766504 SMTOWN
IPSEC BETWEEN ASA USING VTI
 
13:59
(VTI) IPSEC_VPN IN ASA USING (VTI)
Views: 416 IRSHAD ALAM
PTI Ready To Compete With PPP
 
01:33
Subscribe Neo News https://goo.gl/RFZ7kN To Watch Latest Pakistani Talkshows & News Web: http://neonetwork.pk Like Us: https://www.facebook.com/neotvnetwork Twitter: https://twitter.com/NeoNewsNetwork
Views: 13774 Neo TV Network
EdgeRouter L2TP IPSec Server Setup
 
08:15
Since Apple removed PPTP in iOS 10 people have been asking about setting up the L2TP IPSec server on an EdgeRouter. See the comment below about adjusting your MTU if you can't connect after using my configuration! Enjoy! Here are the commands: configure set vpn ipsec ipsec-interfaces interface eth0 set vpn ipsec nat-traversal enable set vpn l2tp remote-access authentication mode local set vpn l2tp remote-access authentication local-users username whowe password LETMEIN! set vpn l2tp remote-access client-ip-pool start 192.168.66.20 set vpn l2tp remote-access client-ip-pool stop 192.168.66.22 set vpn l2tp remote-access dns-servers server-1 8.8.8.8 set vpn l2tp remote-access dns-servers server-2 4.2.2.2 set vpn l2tp remote-access ipsec-settings authentication mode pre-shared-secret set vpn l2tp remote-access ipsec-settings authentication pre-shared-secret REALLYLETMEIN! set vpn l2tp remote-access ipsec-settings ike-lifetime 3600 set vpn ipsec auto-firewall-nat-exclude enable set vpn l2tp remote-access dhcp-interface eth0 commit save You then need firewall rules in WAN_LOCAL for: IKE - UPD 500; L2TP - UDP 1701; ESP - Protocol 50; NAT-T UDP 4500 Thank you again! Please subscribe, comment, share, and give a thumbs-up!
Views: 32737 Willie Howe
CCNA v3.0 200-125 GNS3 Labs: Troubleshoot PPP Mulitlink. Be careful of debugs!
 
10:19
This is one of multiple GNS3 labs videos. In this video we troubleshoot a PPP Mulitlink issue. =========================================== Tasks: =========================================== Troubleshoot the network. =========================================== IOS used: c3725-adventerprisek9-mz.124-15.T14.bin =========================================== Get $200 worth of network software for free here: https://goo.gl/613TUF =========================================== GNS3 Topology: =========================================== https://goo.gl/Yeea9P =========================================== Resources: =========================================== http://www.cisco.com/c/en/us/support/docs/wan/point-to-point-protocol-ppp/10313-config-pap.html http://www.cisco.com/c/en/us/support/docs/wan/point-to-point-protocol-ppp/25647-understanding-ppp-chap.html
Views: 2085 David Bombal
Pakistani Reaction | Top 10 Economies In The World 2018 | Top 10 Gdp Countries 2018
 
07:07
Pakistani Reaction | Top 10 Economies In The World 2018 | Top 10 Gdp Countries 2018 Subscribe To My Channel : Karachi Reaction Source: Top 10 Economies in the world 2018 (GDP PPP) https://www.youtube.com/watch?v=6bjxxQtd0yU Copyright Disclaimer Under Section 107 of the Copyright Act 1976, allowance is made for "fair use" for purposes such as criticism, comment, news reporting, teaching, scholarship, and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational or personal use tips the balance in favor of fair use Category
Views: 6822 Karachi Reaction
3rd party Cisco for BT ADSL+  and BT Infinity
 
06:26
A short guide on how to configure a Cisco router for use with your BT internet connection instead of the BT HomeHub. How to do it. And why you shouldn't ADSL 2+ CONFIG hostname Router_1 ! ! ! ip dhcp excluded-address 192.168.1.1 192.168.1.200 ! ip dhcp pool LAN import all network 192.168.1.0 255.255.255.0 default-router 192.168.1.1 dns-server 8.8.8.8 ! ! ! ip domain name example.co.uk ip name-server 8.8.8.8 ip inspect name local-site udp ip inspect name local-site tcp ip inspect name local-site icmp router-traffic ip cef login on-failure log no ipv6 cef ! ! ! username NAME secret PASSWORD ! ! interface ATM0 no ip address no atm ilmi-keepalive pvc 0/38 encapsulation aal5mux ppp dialer dialer pool-member 1 ! ! ! interface FastEthernet3 description LAN_DATA no ip address spanning-tree portfast ! interface Vlan1 ip address 192.168.1.1 255.255.255.0 no ip redirects no ip unreachables no ip proxy-arp ip nat inside ip virtual-reassembly in ip tcp adjust-mss 1452 ! interface Dialer1 ip address negotiated ip access-group ingress_acl in ip access-group egress_acl out no ip redirects no ip unreachables no ip proxy-arp ip nat outside ip inspect local-site out ip virtual-reassembly in encapsulation ppp dialer pool 1 dialer-group 10 ppp authentication chap callin ppp chap hostname [email protected] ppp chap password anything ! ! no ip nat service sip udp port 5060 ip nat source static udp 192.168.1.202 22 interface Dialer1 22 ip route 0.0.0.0 0.0.0.0 Dialer1 ! ip access-list extended egress_acl permit tcp any any permit udp any any deny udp any gt 0 any gt 0 log deny tcp any gt 0 any gt 0 log deny ip any any log ip access-list extended ingress_acl deny ip 58.218.198.0 0.0.0.255 any deny tcp host 5.188.87.55 any log deny ip host 5.188.87.55 any log permit tcp any any eq ftp log permit udp any any eq 21 permit tcp 92.207.0.0 0.0.255.255 any permit tcp any any eq 22 permit udp host 8.8.8.8 any deny udp any gt 0 any gt 0 log deny tcp any gt 0 any gt 0 log deny ip any any log ! access-list 1 permit 192.168.0.0 0.0.255.255 dialer-list 1 protocol ip permit ! ! line vty 0 4 transport input ssh *BT Fibre / Infinity* hostname Router_1 ! ! ! ip dhcp excluded-address 192.168.1.1 192.168.1.200 ! ip dhcp pool LAN import all network 192.168.1.0 255.255.255.0 default-router 192.168.1.1 dns-server 8.8.8.8 ! ! ! ip domain name example.co.uk ip name-server 8.8.8.8 ip inspect name local-site udp ip inspect name local-site tcp ip inspect name local-site icmp router-traffic ip cef login on-failure log no ipv6 cef ! ! ! username NAME secret PASSWORD ! ! interface Ethernet0 no ip address service-policy output parent_upstream hold-queue 2304 out ! interface Ethernet0.101 encapsulation dot1Q 101 pppoe enable group global pppoe-client dial-pool-number 1 pppoe-client ppp-max-payload 1492 ! ! ! interface FastEthernet3 description LAN_DATA no ip address spanning-tree portfast ! interface Vlan1 ip address 192.168.1.1 255.255.255.0 no ip redirects no ip unreachables no ip proxy-arp ip nat inside ip virtual-reassembly in ip tcp adjust-mss 1452 ! interface Dialer1 ip address negotiated ip access-group ingress_acl in ip access-group egress_acl out no ip redirects no ip unreachables no ip proxy-arp ip nat outside ip inspect local-site out ip virtual-reassembly in encapsulation ppp dialer pool 1 dialer-group 10 ppp authentication chap callin ppp chap hostname [email protected] ppp chap password anything ppp ipcp dns reques ! ! no ip nat service sip udp port 5060 ip nat source static udp 192.168.1.202 22 interface Dialer1 22 ip route 0.0.0.0 0.0.0.0 Dialer1 ! ip access-list extended egress_acl permit tcp any any permit udp any any deny udp any gt 0 any gt 0 log deny tcp any gt 0 any gt 0 log deny ip any any log ip access-list extended ingress_acl deny ip 58.218.198.0 0.0.0.255 any deny tcp host 5.188.87.55 any log deny ip host 5.188.87.55 any log permit tcp any any eq ftp log permit udp any any eq 21 permit tcp 92.207.0.0 0.0.255.255 any permit tcp any any eq 22 permit udp host 8.8.8.8 any deny udp any gt 0 any gt 0 log deny tcp any gt 0 any gt 0 log deny ip any any log ! access-list 1 permit 192.168.0.0 0.0.255.255 dialer-list 1 protocol ip permit ! ! line vty 0 4 transport input ssh
Views: 211 MTM

Different color eyes scholarship essay
Difference between academic essay and journal article
University of miami mailing address admissions essay
Essay on shantiniketan in hindi language
Literary essay definition for kids